topic Re: Unable to boot to P3600 post 2.2.0 firmware update in Solid State Drives (NAND)

Unable to boot to P3600 post 2.2.0 firmware update

SRobe10 — Sun, 15 Feb 2015 05:34:37 GMT

I just purchased a P3600 and installed in in a supermicro X10SRW-F system board with the latest bios. I installed Server 2012R2 in the P3600 and had it booting fine with the firmware it came with., I then installed the Data Center Tool 2.2.0 and performed the steps to update the firmware which it stated completed successfully. After the update I rebooted the system and now it will not boot to the P3600. So I installed it into a system that already has a boot drive to verify the P3600 was still accessible and it appears to still have all it's data it just refuses to boot to it.

Thoughts on what to try from here?

Thanks

Steve

Here is the idct show -intelssd

- IntelSSD Index 0 -

Bootloader: 8B1B012DDevicePath: \\\\.\\PHYSICALDRIVE2DeviceStatus: HealthyFirmware: 8DV10130FirmwareUpdateAvailable: Firmware is up to date as of this tool release.Index: 0ProductFamily: Intel SSD DC P3600 SeriesModelNumber: INTEL SSDPEDME012T4SerialNumber: CVMD4343007Q1P2CGN

Re: Unable to boot to P3600 post 2.2.0 firmware update

ASouz7 — Mon, 16 Feb 2015 20:43:32 GMT

Steveme,

Can you let us know if you receive any error massages or error codes when you try to boot it ?

Re: Unable to boot to P3600 post 2.2.0 firmware update

SRobe10 — Mon, 16 Feb 2015 20:46:34 GMT

I Don't receive any errors. It simply skips the Uefi shell instead of booting to the P3600.

Re: Unable to boot to P3600 post 2.2.0 firmware update

CChon3 — Tue, 17 Feb 2015 03:35:39 GMT

Can you list out all the entries in the BIOS boot order?

Is there a "Windows Boot Manager" listed in the BIOS boot order?

Re: Unable to boot to P3600 post 2.2.0 firmware update

SRobe10 — Tue, 17 Feb 2015 22:11:55 GMT

Re: Unable to boot to P3600 post 2.2.0 firmware update

SRobe10 — Tue, 17 Feb 2015 22:16:15 GMT

I don't see anything in the bios about Windows Boot Manager.

Re: Unable to boot to P3600 post 2.2.0 firmware update

SRobe10 — Tue, 17 Feb 2015 22:17:05 GMT

With the current settings it was working until I installed the new firmware.

Re: Unable to boot to P3600 post 2.2.0 firmware update

ASouz7 — Wed, 18 Feb 2015 20:00:19 GMT

Hello Steveme,

We wonder if reinstalling Windows* would be an option for you?

*Please make sure you backed up all relevant information before this procedure and then restore it.

Re: Unable to boot to P3600 post 2.2.0 firmware update

SRobe10 — Wed, 18 Feb 2015 20:37:00 GMT

I changed the bois boot to both Legacy and dual and neither helped. I then reinstalled windows and the system won't boot to the drive to complete the installation. At no point during the boot sequence do I receive an error it simply doesn't boot. Is there a way to reload the firmware that came with the drive?

Re: Unable to boot to P3600 post 2.2.0 firmware update

ASouz7 — Wed, 18 Feb 2015 21:24:34 GMT

Hello steveme,

Please check your private messages.