https://community.solidigm.com/t5/solid-state-drives-nand/530-raid-0-180gb/m-p/10733#M2258 <P>Hello burncycle, let me just verify if it is possible to update the firmware while the drives are in RAID .</P> Mon, 03 Nov 2014 15:59:07 GMT Jose_H_Intel1 2014-11-03T15:59:07Z https://community.solidigm.com/t5/solid-state-drives-nand/530-raid-0-180gb/m-p/10732#M2257 <P>Hello,</P><P></P><P>I'm looking to do the firmware update for my SSDs, but I'm not sure how it will work. Am I okay to update one at a time? Or is there an option to update both at the same time?</P><P>Current: DC12</P><P>Update to DC32_180</P><P></P><P>Thank you</P> Sun, 02 Nov 2014 15:57:21 GMT https://community.solidigm.com/t5/solid-state-drives-nand/530-raid-0-180gb/m-p/10732#M2257 MMiro4 2014-11-02T15:57:21Z https://community.solidigm.com/t5/solid-state-drives-nand/530-raid-0-180gb/m-p/10733#M2258 <P>Hello burncycle, let me just verify if it is possible to update the firmware while the drives are in RAID .</P> Mon, 03 Nov 2014 15:59:07 GMT https://community.solidigm.com/t5/solid-state-drives-nand/530-raid-0-180gb/m-p/10733#M2258 Jose_H_Intel1 2014-11-03T15:59:07Z https://community.solidigm.com/t5/solid-state-drives-nand/530-raid-0-180gb/m-p/10734#M2259 <P>We have confirmed that you should not need to break the RAID to do a firmware update unless the drives are attached to an add-in RAID controller. You can update the firmware while they are attached to the normal motherboard SATA ports.</P> Fri, 07 Nov 2014 22:47:51 GMT https://community.solidigm.com/t5/solid-state-drives-nand/530-raid-0-180gb/m-p/10734#M2259 Jose_H_Intel1 2014-11-07T22:47:51Z