topic Re: How can I update firmware of SSD which attached with SAS Interface? in Archive https://community.solidigm.com/t5/archive/how-can-i-update-firmware-of-ssd-which-attached-with-sas/m-p/14319#M9588 <P>You will need to attach the SSD to a SATA interface.</P><P></P><P>SAS requires additional drivers which are not integrated into the firmware updater.</P> Wed, 24 Aug 2011 17:10:20 GMT idata 2011-08-24T17:10:20Z How can I update firmware of SSD which attached with SAS Interface? https://community.solidigm.com/t5/archive/how-can-i-update-firmware-of-ssd-which-attached-with-sas/m-p/14318#M9587 <P>There is the situation:</P><P>1、Attach Intel SSD with SATA interface，the firmware update will success.</P><P>2、Attach Intel SSD with SAS interface, the firmware update program will not find SSD disk, how can we update in this situation??</P><P></P><P>Thanks.</P> Mon, 22 Aug 2011 06:05:32 GMT https://community.solidigm.com/t5/archive/how-can-i-update-firmware-of-ssd-which-attached-with-sas/m-p/14318#M9587 idata 2011-08-22T06:05:32Z Re: How can I update firmware of SSD which attached with SAS Interface? https://community.solidigm.com/t5/archive/how-can-i-update-firmware-of-ssd-which-attached-with-sas/m-p/14319#M9588 <P>You will need to attach the SSD to a SATA interface.</P><P></P><P>SAS requires additional drivers which are not integrated into the firmware updater.</P> Wed, 24 Aug 2011 17:10:20 GMT https://community.solidigm.com/t5/archive/how-can-i-update-firmware-of-ssd-which-attached-with-sas/m-p/14319#M9588 idata 2011-08-24T17:10:20Z