Intel SSD is not attached or disabled

idata — Wed, 13 Jul 2011 22:13:29 GMT

3WARE 9690-sa 8i Raid card

I've tried disabling the 3ware bios in its own bios and also the motherboard bios.

I don't have any of the AHCI or IDE mode options in my bios.

Downloaded the utility http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18363&ProdId=3113&lang=eng&OSVersion=%0A&DownloadType=Firmware

and

boot from usb, get to the dos prompt and execute the "ISSDFUT" utility and it says

Scanning system for Intel SSDs ...

Scanning.....Completed

Intel SSD is not attached or disabled.

How do I get the Intel utility to recognize my drives so I can upgrade the firmware?

Re: Intel SSD is not attached or disabled

idata — Thu, 14 Jul 2011 23:01:09 GMT

Simply put: you can't. This has to do with PC architecture limitations; your RAID controller requires drivers for communication with it to work. DOS software, such as the Intel software, only works with classic IDE I/O nomenclature and AHCI (only on some systems). This doesn't mean "Intel sucks!", because the same issue would happen if you were using any other brand of SSD or attempting firmware upgrades on MHDDs.

Tinkering around in your PC BIOS and the 3Ware BIOS was a waste of time -- disabling the option ROM won't solve this.

You will need to hook the drives up to an on-board SATA controller to perform firmware upgrades, or put the drives in a machine which have such.

topic Re: Intel SSD is not attached or disabled in Archive

Intel SSD is not attached or disabled

Re: Intel SSD is not attached or disabled