topic Re: Single SSD w/RAIDed HDDs in Archive

Single SSD w/RAIDed HDDs

idata — Tue, 23 Nov 2010 08:12:25 GMT

I've been looking everywhere and everyone seems to say that you should put it in AHCI mode for max performance..

Here's my setup though:

Single SSD X25-M 80GB connected via ICH9R2 2xHDD RAID0 (4xHDDs (2 RAID0) connected via ICH9R

now obviously the BIOS is setup as RAID and not AHCI, would I be loosing any performance by doing this? Also should I be using Windows RAID drivers or Intels or Gigabytes (Using Gigabyte motherboard)

Thanks.

Re: Single SSD w/RAIDed HDDs

idata — Tue, 23 Nov 2010 08:21:49 GMT

If you are set to raid in the BIOS the single drive will be effectively be running in AHCI. Also as the drive is not part of the drive array you will also be getting TRIM You are good to go.

Re: Single SSD w/RAIDed HDDs

idata — Tue, 23 Nov 2010 08:31:39 GMT

Alright thanks for the quick, prompt answer

So should I be using Windows drivers? Intel? GIgabyte?

Edit: /message/82100# 82100 http://communities.intel.com/message/82100# 82100 saw this.. it seems to apply to me, no TRIM?

Re: Single SSD w/RAIDed HDDs

idata — Tue, 23 Nov 2010 15:36:35 GMT

To get TRIM support on a single SSD with other RAID arrays you need to have RST 9.6.

http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=18859&ProductFamily=Chipsets&ProductLine=Chipset+Software&ProductProduct=Intel®+Rapid+Storage+Technology+(Intel®+RST)&lang=eng http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=18859&ProductFamily=Chipsets&ProductLine=Chipset+Software&ProductProduct=Intel%c2%ae+Rapid+Storage+Technology+(Intel%c2%ae+RST)&lang=eng

Re: Single SSD w/RAIDed HDDs

idata — Wed, 24 Nov 2010 05:28:52 GMT

Definitely Intel.

The Windows generic drivers don't support RAID and the "Gigabyte drivers" are just Intel drivers.