topic Re: if fsutil... disabledeletenotify =0, is toolbox needed? in Archive

if fsutil... disabledeletenotify =0, is toolbox needed?

idata — Mon, 18 Oct 2010 16:55:43 GMT

query disabledeletenotify returns 0 so do I need to use the Toolbox software for anything? I ask because I get an error with the Toolbox. Something about the utility doesn't work with RAID even though I am not using RAID. I have a single SSD. However I am using AMD's AHCI driver amdsata.sys so I am assuming that why's I get the RAID error? The toolbox is only compatible with MS's AHCI driver and RST?

If query disabledeletenotify returns 0, does this mean my computer is all set with trim? I am using Windows 7.

Re: if fsutil... disabledeletenotify =0, is toolbox needed?

idata — Mon, 18 Oct 2010 17:06:19 GMT

The fsutil behavior query disabledeletenotify only informs you that the OS is sending the TRIM command to the hard drive. It does not mean that the command is being received by the SSD. If the controller cannot pass the OS TRIM command the SSD does not receive it.

Re: if fsutil... disabledeletenotify =0, is toolbox needed?

idata — Mon, 18 Oct 2010 19:15:59 GMT

How do I know the SSD received it and executed it successfully?

Re: if fsutil... disabledeletenotify =0, is toolbox needed?

idata — Thu, 28 Oct 2010 02:10:07 GMT

Since you are using the AMD drivers, TRIM is not being passed to your SSD.

Re: if fsutil... disabledeletenotify =0, is toolbox needed?

idata — Thu, 28 Oct 2010 06:15:46 GMT

I rolled back to Microsoft's driver.