https://community.solidigm.com/t5/archive/no-hot-plug-in-p55-with-intel-9-6-driver/m-p/5462#M5324 <P>Is there no one from Intel reading these posts?</P> Fri, 21 May 2010 16:07:27 GMT idata 2010-05-21T16:07:27Z https://community.solidigm.com/t5/archive/no-hot-plug-in-p55-with-intel-9-6-driver/m-p/5461#M5323 <P>With the MS AHCI driver I have hot plug capability in all controllers and the devices are all listed in the Safely remove hardware list (all drives) but with the Intel 9.6 driver I can't use the hot plug feature in the P55 because the drive is not on the safe to remove list. I have a hot dock in the top of my case and want to use it while connected to the P55 controller but because I can't safely remove it (it's not on the list) I don't feel comfortable removing the drive. For now I'm sticking with the MSdriver. Is this something I can configure with this 9.6 driver??</P><P>Thanks</P><P>Jim</P> Sun, 16 May 2010 13:52:10 GMT https://community.solidigm.com/t5/archive/no-hot-plug-in-p55-with-intel-9-6-driver/m-p/5461#M5323 idata 2010-05-16T13:52:10Z https://community.solidigm.com/t5/archive/no-hot-plug-in-p55-with-intel-9-6-driver/m-p/5462#M5324 <P>Is there no one from Intel reading these posts?</P> Fri, 21 May 2010 16:07:27 GMT https://community.solidigm.com/t5/archive/no-hot-plug-in-p55-with-intel-9-6-driver/m-p/5462#M5324 idata 2010-05-21T16:07:27Z