https://community.solidigm.com/t5/archive/x25-m-failure/m-p/5145#M5007 <P>I would like you to change the port that you are using along with the cables of the Solid State Drives (power and information); also if you can run a secure erase to this disk, you can download the bootable tool from the following link: <A href="http://cmrr.ucsd.edu" rel="nofollow noopener noreferrer">http://cmrr.ucsd.edu</A> <A href="http://cmrr.ucsd.edu" rel="nofollow noopener noreferrer">http://cmrr.ucsd.edu</A> after this you test the Solid State Drive and cannot see the Solid State Drive, I suggest you to test the Solid State Drive in a different compatible motherboard and see if it works there, if the issue persist, please contact the Solid State Drive support phone number: 916 377 7000 option 6.</P><P> </P><P> </P> Mon, 04 Oct 2010 21:13:27 GMT MBall5 2010-10-04T21:13:27Z https://community.solidigm.com/t5/archive/x25-m-failure/m-p/5144#M5006 <P>-Running Dell 630 with Win08 Server R2 and 8GB RAM; </P><P>-X25-M with latest firmware is running on modular bay;</P><P>-BIOS (latest) set for AHCI (but same behavior occurs on IDE setting);</P><P>-Machine boots, x25 is recognized and Intell SSD Toolbox shows everything ok;</P><P>-SSD runs fine and after a few minutes x25 disconnects and is not recognized;</P><P>-Modular bay is taken out and back in and x25 is recognized again;</P><P>-Trying to also run VHDs on x25 and failure makes it impossible;</P><P>-Anyone suggestions are appreciated.</P> Sun, 11 Apr 2010 04:59:11 GMT https://community.solidigm.com/t5/archive/x25-m-failure/m-p/5144#M5006 idata 2010-04-11T04:59:11Z https://community.solidigm.com/t5/archive/x25-m-failure/m-p/5145#M5007 <P>I would like you to change the port that you are using along with the cables of the Solid State Drives (power and information); also if you can run a secure erase to this disk, you can download the bootable tool from the following link: <A href="http://cmrr.ucsd.edu" rel="nofollow noopener noreferrer">http://cmrr.ucsd.edu</A> <A href="http://cmrr.ucsd.edu" rel="nofollow noopener noreferrer">http://cmrr.ucsd.edu</A> after this you test the Solid State Drive and cannot see the Solid State Drive, I suggest you to test the Solid State Drive in a different compatible motherboard and see if it works there, if the issue persist, please contact the Solid State Drive support phone number: 916 377 7000 option 6.</P><P> </P><P> </P> Mon, 04 Oct 2010 21:13:27 GMT https://community.solidigm.com/t5/archive/x25-m-failure/m-p/5145#M5007 MBall5 2010-10-04T21:13:27Z