https://community.solidigm.com/t5/archive/firmware-update-can-t-find-my-80g-ssd/m-p/3254#M3116 <P>That solved the problem. Thanks</P> Thu, 24 Dec 2009 17:10:48 GMT idata 2009-12-24T17:10:48Z https://community.solidigm.com/t5/archive/firmware-update-can-t-find-my-80g-ssd/m-p/3252#M3114 <P>I have a I7-920 system on an Intel board - the system has 4 drives - The SSD which I boot off of, 2 hard drives that are in a Raid configuration, and another hard drive to hold temporary large files. When I boot the firmware update, get an error message that the Intel SSD is not attached or disabled. Any ideas?</P> Wed, 23 Dec 2009 22:33:58 GMT https://community.solidigm.com/t5/archive/firmware-update-can-t-find-my-80g-ssd/m-p/3252#M3114 idata 2009-12-23T22:33:58Z https://community.solidigm.com/t5/archive/firmware-update-can-t-find-my-80g-ssd/m-p/3253#M3115 <P>Try setting your SATA ports to IDE mode for the flash only. Reset them before booting back into the OS.</P> Thu, 24 Dec 2009 07:12:27 GMT https://community.solidigm.com/t5/archive/firmware-update-can-t-find-my-80g-ssd/m-p/3253#M3115 idata 2009-12-24T07:12:27Z https://community.solidigm.com/t5/archive/firmware-update-can-t-find-my-80g-ssd/m-p/3254#M3116 <P>That solved the problem. Thanks</P> Thu, 24 Dec 2009 17:10:48 GMT https://community.solidigm.com/t5/archive/firmware-update-can-t-find-my-80g-ssd/m-p/3254#M3116 idata 2009-12-24T17:10:48Z