topic Re: Intel 330 series SSD 180GB Firmware in Archive

Intel 330 series SSD 180GB Firmware

idata — Sun, 03 Jun 2012 23:08:01 GMT

I just recently purchased an /message/156316# 156316 Intel 330 series SSD 180GB. It is connected to a SATA 3 port @6Gb/s. The reason I'm here is the SDD seems to slowdown after I run the the toolbox trim optimizer.

The slowdown seems to last about a minute then it goes back to normal. The toolbox ver. is 3.03 which I believe is the lastest.

I am curious what the current firmware is...Mine is listed as 300i. Is there a newer ver? or will there be one soon?

I have an older 320 series 120GB that is only SATA2 that did not slowdown after trim.

Dell XPS 8300 desktop

i7 2600

16GB ram

Windows 7 x64 home

Message was edited by: Gary Lord

Re: Intel 330 series SSD 180GB Firmware

idata — Tue, 12 Jun 2012 02:53:36 GMT

I removed the Intel rapid storage software and the SSD now works OK.

Guess it's not compatible.........

Re: Intel 330 series SSD 180GB Firmware

idata — Tue, 12 Jun 2012 03:01:43 GMT

Interesting.

I'm having issues with disconnects/reconnects on the 330 120GB. Did you remove Intel RST drivers too?

Are you in RAID or standard AHCI?

Re: Intel 330 series SSD 180GB Firmware

idata — Tue, 12 Jun 2012 03:12:47 GMT

I had RAID before I got this SSD...I'm on AHCI now. I guess I just forgot (or didn't know) that the RAID Rapid storage software would affect the SSD. I'm no expert, but after sifting through the many threads thought I'd try removing it.

I wasn't getting disconnects just freezes after using the toolbox to TRIM.

Good Luck with yours.

Re: Intel 330 series SSD 180GB Firmware

idata — Tue, 12 Jun 2012 04:13:16 GMT

Yeah, I had the same issues when using vanilla AHCI.

Sigh.