[root@SSD-test ~]# isdct show -intelssd - Intel SSD DC S4500 Series BTYS82150JGX480BGN - Bootloader : Property not found DevicePath : /dev/sg1 DeviceStatus : Healthy Firmware : SCV10142 FirmwareUpdateAvailable : The selected Intel SSD contains current firmware as of this tool release. Index : 0 ModelNumber : INTEL SSDSC2KB480G7 ProductFamily : Intel SSD DC S4500 Series SerialNumber : BTYS82150JGX480BGN - Intel SSD DC S4500 Series BTYS82160CQ6480BGN - Bootloader : Property not found DevicePath : /dev/sg2 DeviceStatus : Healthy Firmware : SCV10142 FirmwareUpdateAvailable : The selected Intel SSD contains current firmware as of this tool release. Index : 1 ModelNumber : INTEL SSDSC2KB480G7 ProductFamily : Intel SSD DC S4500 Series SerialNumber : BTYS82160CQ6480BGN [root@SSD-test ~]# sas3ircu 0 display Avago Technologies SAS3 IR Configuration Utility. Version 17.00.00.00 (2018.04.02) Copyright (c) 2009-2018 Avago Technologies. All rights reserved. Read configuration has been initiated for controller 0 ------------------------------------------------------------------------ Controller information ------------------------------------------------------------------------ Controller type : SAS3008 BIOS version : 8.35.00.00 Firmware version : 15.00.04.00 Channel description : 1 Serial Attached SCSI Initiator ID : 0 Maximum physical devices : 255 Concurrent commands supported : 4096 Slot : Unknown Segment : 0 Bus : 27 Device : 0 Function : 0 RAID Support : Yes ------------------------------------------------------------------------ IR Volume information ------------------------------------------------------------------------ IR volume 1 Volume ID : 323 Status of volume : Okay (OKY) Volume wwid : 017cd61908826237 RAID level : RAID1 Size (in MB) : 456809 Physical hard disks : PHY[0] Enclosure#/Slot# : 1:0 PHY[1] Enclosure#/Slot# : 1:1 ------------------------------------------------------------------------ Physical device information ------------------------------------------------------------------------ Initiator at ID #0 Device is a Hard disk Enclosure # : 1 Slot # : 0 SAS Address : 4433221-1-0000-0000 State : Optimal (OPT) Size (in MB)/(in sectors) : 457862/937703087 Manufacturer : ATA Model Number : INTEL SSDSC2KB48 Firmware Revision : 0142 Serial No : BTYS82150JGX480BGN Unit Serial No(VPD) : BTYS82150JGX480BGN GUID : 55cd2e414f6dbc44 Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 1 Slot # : 1 SAS Address : 4433221-1-0100-0000 State : Optimal (OPT) Size (in MB)/(in sectors) : 457862/937703087 Manufacturer : ATA Model Number : INTEL SSDSC2KB48 Firmware Revision : 0142 Serial No : BTYS82160CQ6480BGN Unit Serial No(VPD) : BTYS82160CQ6480BGN GUID : 55cd2e414f6e5866 Protocol : SATA Drive Type : SATA_SSD ------------------------------------------------------------------------ Enclosure information ------------------------------------------------------------------------ Enclosure# : 1 Logical ID : 5505dac4:ca75f000 Numslots : 8 StartSlot : 0 ------------------------------------------------------------------------ SAS3IRCU: Command DISPLAY Completed Successfully. SAS3IRCU: Utility Completed Successfully. [root@SSD-test ~]# [root@SSD-test ~]# [root@SSD-test ~]# [root@SSD-test ~]# isdct show -a -smart - SMART Attributes BTYS82150JGX480BGN - - 05 - Action : Pass Description : Vendor Specific ID : 05 Normalized : 99 Raw : 4 Status : 50 Threshold : 0 Worst : 99 - 09 - Action : Pass Description : Power-On Hours Count ID : 09 Normalized : 100 Raw : 119 Status : 50 Threshold : 0 Worst : 100 - 0C - Action : Pass Description : Power Cycle Count ID : 0C Normalized : 100 Raw : 15 Status : 50 Threshold : 0 Worst : 100 - AA - Action : Pass Description : Available Reserved Space ID : AA Normalized : 99 Raw : 0 Status : 51 Threshold : 10 Worst : 99 - AB - Action : Pass Description : Program Fail Count ID : AB Normalized : 100 Raw : 1 Status : 50 Threshold : 0 Worst : 100 - AC - Action : Pass Description : Erase Fail Count ID : AC Normalized : 100 Raw : 0 Status : 50 Threshold : 0 Worst : 100 - AE - Action : Pass Description : Unexpected Power Loss Count ID : AE Normalized : 100 Raw : 13 Status : 50 Threshold : 0 Worst : 100 - AF - Action : Pass Description : Power Loss Protection Failure ID : AF LastTestResult : 2383 microseconds Normalized : 100 Raw : 69188520271 Status : 51 Threshold : 10 TimeSinceLastTest : 7157 Minutes TotalTests : 16 Worst : 100 - B7 - Action : Pass Description : SATA Downshift Count ID : B7 Normalized : 100 Raw : 0 Status : 50 Threshold : 0 Worst : 100 - B8 - Action : Pass Description : End-to-End Error Detection Count ID : B8 Normalized : 100 Raw : 0 Status : 51 Threshold : 90 Worst : 100 - BB - Action : Pass Description : Uncorrectable Error Count ID : BB Normalized : 100 Raw : 0 Status : 50 Threshold : 0 Worst : 100 - BE - Action : Pass CurrentTemperature : 27 degree C Description : Temperature HighestTemperature : 28 degree C ID : BE LowestTemperature : 24 degree C Normalized : 73 OverTemperatureCounter : 0 Raw : 471334939 Status : 34 Threshold : 0 Worst : 73 - C0 - Action : Pass Description : Unsafe Shutdown Count ID : C0 Normalized : 100 Raw : 13 Status : 50 Threshold : 0 Worst : 100 - C2 - Action : Pass Description : Temperature - Device Internal ID : C2 Normalized : 100 Raw : 27 Status : 34 Threshold : 0 Worst : 100 - C5 - Action : Pass Description : Pending Sector Count ID : C5 Normalized : 100 Raw : 0 Status : 18 Threshold : 0 Worst : 100 - C7 - Action : Pass Description : CRC Error Count ID : C7 Normalized : 100 Raw : 0 Status : 62 Threshold : 0 Worst : 100 - E1 - Action : Pass Description : Host Writes ID : E1 Normalized : 100 Raw : 23908 Status : 50 Threshold : 0 Worst : 100 - E2 - Action : Pass Description : Timed Workload - Media Wear ID : E2 Normalized : 100 Raw : 81 Status : 50 Threshold : 0 Worst : 100 - E3 - Action : Pass Description : Timed Workload - Host Read/Write Ratio ID : E3 Normalized : 100 Raw : 72 Status : 50 Threshold : 0 Worst : 100 - E4 - Action : Pass Description : Timed Workload Timer ID : E4 Normalized : 100 Raw : 7035 Status : 50 Threshold : 0 Worst : 100 - E8 - Action : Pass Description : Available Reserved Space ID : E8 Normalized : 99 Raw : 0 Status : 51 Threshold : 10 Worst : 99 - E9 - Action : Pass Description : Media Wearout Indicator ID : E9 Normalized : 100 Raw : 0 Status : 50 Threshold : 0 Worst : 100 - EA - Action : Pass Description : Thermal Throttle Status ID : EA Normalized : 100 Raw : 0 Status : 50 Threshold : 0 ThrottleStatus : 0 % ThrottlingEventCount : 0 Worst : 100 - F1 - Action : Pass Description : Total LBAs Written ID : F1 Normalized : 100 Raw : 23908 Status : 50 Threshold : 0 Worst : 100 - F2 - Action : Pass Description : Total LBAs Read ID : F2 Normalized : 100 Raw : 79025 Status : 50 Threshold : 0 Worst : 100 - F3 - Action : Pass Description : Vendor Specific ID : F3 Normalized : 100 Raw : 55592 Status : 50 Threshold : 0 Worst : 100 - SMART Attributes BTYS82160CQ6480BGN - - 05 - Action : Pass Description : Vendor Specific ID : 05 Normalized : 100 Raw : 0 Status : 50 Threshold : 0 Worst : 100 - 09 - Action : Pass Description : Power-On Hours Count ID : 09 Normalized : 100 Raw : 119 Status : 50 Threshold : 0 Worst : 100 - 0C - Action : Pass Description : Power Cycle Count ID : 0C Normalized : 100 Raw : 15 Status : 50 Threshold : 0 Worst : 100 - AA - Action : Pass Description : Available Reserved Space ID : AA Normalized : 100 Raw : 0 Status : 51 Threshold : 10 Worst : 100 - AB - Action : Pass Description : Program Fail Count ID : AB Normalized : 100 Raw : 0 Status : 50 Threshold : 0 Worst : 100 - AC - Action : Pass Description : Erase Fail Count ID : AC Normalized : 100 Raw : 0 Status : 50 Threshold : 0 Worst : 100 - AE - Action : Pass Description : Unexpected Power Loss Count ID : AE Normalized : 100 Raw : 13 Status : 50 Threshold : 0 Worst : 100 - AF - Action : Pass Description : Power Loss Protection Failure ID : AF LastTestResult : 2737 microseconds Normalized : 100 Raw : 69189175985 Status : 51 Threshold : 10 TimeSinceLastTest : 7167 Minutes TotalTests : 16 Worst : 100 - B7 - Action : Pass Description : SATA Downshift Count ID : B7 Normalized : 100 Raw : 0 Status : 50 Threshold : 0 Worst : 100 - B8 - Action : Pass Description : End-to-End Error Detection Count ID : B8 Normalized : 100 Raw : 0 Status : 51 Threshold : 90 Worst : 100 - BB - Action : Pass Description : Uncorrectable Error Count ID : BB Normalized : 100 Raw : 0 Status : 50 Threshold : 0 Worst : 100 - BE - Action : Pass CurrentTemperature : 28 degree C Description : Temperature HighestTemperature : 28 degree C ID : BE LowestTemperature : 24 degree C Normalized : 72 OverTemperatureCounter : 0 Raw : 471334940 Status : 34 Threshold : 0 Worst : 72 - C0 - Action : Pass Description : Unsafe Shutdown Count ID : C0 Normalized : 100 Raw : 13 Status : 50 Threshold : 0 Worst : 100 - C2 - Action : Pass Description : Temperature - Device Internal ID : C2 Normalized : 100 Raw : 28 Status : 34 Threshold : 0 Worst : 100 - C5 - Action : Pass Description : Pending Sector Count ID : C5 Normalized : 100 Raw : 0 Status : 18 Threshold : 0 Worst : 100 - C7 - Action : Pass Description : CRC Error Count ID : C7 Normalized : 100 Raw : 0 Status : 62 Threshold : 0 Worst : 100 - E1 - Action : Pass Description : Host Writes ID : E1 Normalized : 100 Raw : 23908 Status : 50 Threshold : 0 Worst : 100 - E2 - Action : Pass Description : Timed Workload - Media Wear ID : E2 Normalized : 100 Raw : 81 Status : 50 Threshold : 0 Worst : 100 - E3 - Action : Pass Description : Timed Workload - Host Read/Write Ratio ID : E3 Normalized : 100 Raw : 72 Status : 50 Threshold : 0 Worst : 100 - E4 - Action : Pass Description : Timed Workload Timer ID : E4 Normalized : 100 Raw : 7045 Status : 50 Threshold : 0 Worst : 100 - E8 - Action : Pass Description : Available Reserved Space ID : E8 Normalized : 100 Raw : 0 Status : 51 Threshold : 10 Worst : 100 - E9 - Action : Pass Description : Media Wearout Indicator ID : E9 Normalized : 100 Raw : 0 Status : 50 Threshold : 0 Worst : 100 - EA - Action : Pass Description : Thermal Throttle Status ID : EA Normalized : 100 Raw : 0 Status : 50 Threshold : 0 ThrottleStatus : 0 % ThrottlingEventCount : 0 Worst : 100 - F1 - Action : Pass Description : Total LBAs Written ID : F1 Normalized : 100 Raw : 23908 Status : 50 Threshold : 0 Worst : 100 - F2 - Action : Pass Description : Total LBAs Read ID : F2 Normalized : 100 Raw : 80469 Status : 50 Threshold : 0 Worst : 100 - F3 - Action : Pass Description : Vendor Specific ID : F3 Normalized : 100 Raw : 55242 Status : 50 Threshold : 0 Worst : 100 [root@SSD-test ~]# smartctl -a /dev/sg0 smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-957.el7.x86_64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: LSI Product: Logical Volume Revision: 3000 Compliance: SPC-4 User Capacity: 478,998,953,984 bytes [478 GB] Logical block size: 512 bytes Rotation Rate: Solid State Device Logical Unit id: 0x600508e0000000003762820819d67c01 Device type: disk Local Time is: Wed Feb 20 09:30:53 2019 KST SMART support is: Unavailable - device lacks SMART capability. === START OF READ SMART DATA SECTION === Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Error Counter logging not supported Device does not support Self Test logging [root@SSD-test ~]# smartctl -a /dev/sg1 smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-957.el7.x86_64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: INTEL SSDSC2KB480G7 Serial Number: BTYS82150JGX480BGN LU WWN Device Id: 5 5cd2e4 14f6dbc44 Firmware Version: SCV10142 User Capacity: 480,103,981,056 bytes [480 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Feb 20 09:30:56 2019 KST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 099 099 000 Old_age Always - 4 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 119 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15 170 Unknown_Attribute 0x0033 099 099 010 Pre-fail Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 13 175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 69188585807 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 073 000 Old_age Always - 27 (Min/Max 24/28) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 13 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 27 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 23908 226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 81 227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 72 228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 7036 232 Available_Reservd_Space 0x0033 099 099 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 23908 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 79025 243 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 55592 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. [root@SSD-test ~]# smartctl -a /dev/sg2 smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-957.el7.x86_64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: INTEL SSDSC2KB480G7 Serial Number: BTYS82160CQ6480BGN LU WWN Device Id: 5 5cd2e4 14f6e5866 Firmware Version: SCV10142 User Capacity: 480,103,981,056 bytes [480 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Feb 20 09:30:58 2019 KST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 119 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15 170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 13 175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 69189241521 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 072 072 000 Old_age Always - 28 (Min/Max 24/28) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 13 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 28 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 23908 226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 81 227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 72 228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 7046 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 23908 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 80469 243 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 55242 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.